SAE MAM6304B

Posted on

Click here to purchase
This specification covers an aircraft-quality, low-alloy, heat-resistant steel in the form of bars, forgings, mechanical tubing, and forging stock procured in SI (metric) units.

AMS 6304 is the inch/pound version of this MAM.

These products have been used typically for parts, such as shafts, and fasteners, for service up to 540 degrees C, but usage is not limited to such applications.

Product Details

Published:
03/12/2003
File Size:
1 file , 75 KB

SAE MA614A

Posted on

Click here to purchase
This SAE Aerospace Standard (AS) establishes the requirements for polytetrafluoroethylene (PTFE) hose assemblies for use in aerospace hydraulic systems at temperatures between -55 degrees C and 204 degrees C and at a nominal pressure up to 28 000 kPa (280 bar). The hose assemblies are also suitable for use within the same temperature and pressure limitations in aerospace pneumatic systems where some gaseous diffusion through the wall of the PTFE liner can be tolerated.

The use of these hose assemblies in high pressure pneumatic storage systems is not recommended. In addition, installations in which the limits specified herein are exceeded, or in which the application is not covered specifically by this document, for example, oxygen, shall be subject to the approval of the purchaser.

Product Details

Published:
07/27/2015
File Size:
1 file , 140 KB

SAE SSB1_001

Posted on

Click here to purchase

This document is an annex to EIA Engineering Bulletin, SSB-1, Guidelines for Using Plastic Encapsulated Microcircuits and Semiconductors in Military, Aerospace and Other Rugges Applications (the latest revision).

The scope of this document is to establish the recommended minimum qualification and monitoring testing of plastic encapsulated microcircuits and discrete semiconductors suitable for potential use in many rugged, military, severe, or other environments.

Product Details

Published:
09/12/2014
File Size:
1 file , 45 KB

SAE TAHB0009

Posted on

Click here to purchase

This handbook provides “how to” guidance to industry and government for the reliability Activities and Methods contained in ANSI/GEIA-STD-0009 for developing reliable products and systems, successfully demonstrating them during test and evaluation, and sustaining them throughout the system/product life cycle.

Objective 1: Understand Customer/User Requirements and constraints. The team (developer, customer, and user), includes the Activities necessary to ensure that the user’s requirements and product needs are fully understood and defined, so that a comprehensive design specification and Reliability Program Plan are generated.

Objective 2: Design and redesign for reliability. The developer implements a set of engineering Activities so that the resulting system/product satisfies the customer’s documented requirements and needs.

Objective 3: Produce reliable systems/products. The developer performs the Activities that assure the customer that the reliability requirements and product needs have been satisfied.

Objective 4: Monitor and assess user reliability. The team establishes a closed-loop feedback method for continuous monitoring of reliability trends and incorporation of recommended improvements (corrective actions) .

ANSI/GEIA-STD-0009 and this Handbook define a systematic approach to engineering a system/product, incorporating best practices that have evolved considerably in recent years.

Product Details

Published:
05/01/2013
File Size:
1 file , 7.8 MB

SAE USCAR10

Posted on

Click here to purchase

This standard provides a test method for determining the torque-tension relationship of both external and internal metric threaded fasteners for the purpose of measuring the frictional characteristics of the threaded fasteners. The results obtained by this test are relevant to the test conditions only and should not be utilized for specific applications.

The test shall consist of a single installation of the sample fastener in a test fixture using a DC electric power tool. The test sample shall be assembled onto an appropriate mating test part (i.e., a nut will be tested by being driven onto a test screw). The test sample shall be driven against a test washer as the bearing surface.

Product Details

Published:
12/30/1998
File Size:
1 file , 320 KB

SAE USCAR40-1

Posted on

Click here to purchase
This guideline is applicable to existing lead solder production products that will change to lead-free solder processes to meet the ELV Directive 2000/53/EC Annex II, exemption 8B requirements. This guideline is applicable to similar products used by multiple OEM’s that have the same manufacturing processes/equipment. The intent is to streamline the supplier’s environmental testing via common qualification to reduce timing, quantities, and costs.

Product Details

Published:
04/22/2015
File Size:
1 file , 830 KB