Category: SAE

Aerospace Series – First Article Inspection Requirements
standard by SAE International, 06/28/2023

RING, RETAINING, EXTERNAL, INTERLOCKING
standard by SAE International, 03/20/2023

Fuel Economy Measurement Road Test Procedure (Stabilized: May 2023)
standard by SAE International, 05/10/2023

Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 57Ni – 20Cr – 10Co – 8.5Mo – 2.1Ti – 1.5Al – 0.005B Vacuum Induction and Consumable Electrode Melted, Solution Heat Treated Precipitation Heat Treatable
standard by SAE International, 06/27/2023

Medium Temperature, Out-of-Autoclave, Oven-Vacuum-Bag Cure Epoxy Resin Impregnated Fiber Reinforced Composite Materials
standard by SAE International, 08/01/2023

System Theoretic Process Analysis (STPA) Recommended Practices for Evaluations of Safety-Critical Systems in Any Industry
standard by SAE International, 05/22/2023

Steel Sheet, Strip, and Plate 0.95Cr – 0.20Mo (0.33 – 0.38C) (SAE 4135)
standard by SAE International, 03/23/2023

CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, COAXIAL, SIZE 12 (FOR MIL-DTL-38999 SERIES I, II, III, AND IV CONNECTORS)
standard by SAE International, 05/10/2023

CRIMPING TOOLS, TYPE 2, TERMINAL, HAND, WIRE TERMINATION, FOR COXIAL, TWIN AXIAL, TRIAXIAL, SHIELDED CONTACTS AND FERRULES, TERMINAL LUGS, SPLICES, AND END CAPS
standard by SAE International, 05/23/2023

Polymeric Bearings for Linear Actuators
standard by SAE International, 06/20/2023