SAE J2953/1_202305
Plug-In Electric Vehicle (PEV) Interoperability with Electric Vehicle Supply Equipment (EVSE)
standard by SAE International, 05/24/2023
SAE AMS3109
Primer, Adhesive, Electrodeposited -55 to +82 °C (-67 to +180 °F)
standard by SAE International, 08/10/2022
SAE AMS5768M
Alloy, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Rings and Stock for Forgings, Rings and Heading 21Cr – 20Ni – 20Co – 3.0Mo – 2.5W – 1.0Cb – 0.15N – 31Fe Solution and Precipitation Heat Treated
standard by SAE International, 06/12/2023
SAE AMS5629/H950
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr – 8.0Ni – 2.2Mo – 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardened (H950)
standard by SAE International, 03/23/2023
SAE J2258_202207
Light Utility Vehicles
standard by SAE International, 07/19/2022
SAE AMS6302L
Low-Alloy Steel, Heat-Resistant, Bars, Forgings, Mechanical Tubing and Forging Stock 0.65Si – 1.25Cr – 0.50Mo – 0.25V (0.28 – 0.33C)
standard by SAE International, 03/20/2023
SAE USCAR2-8
PERFORMANCE SPECIFICATION FOR AUTOMOTIVE ELECTRICAL CONNECTOR SYSTEMS
standard by SAE International, 06/30/2022
SAE USCAR46
ENGINE OIL PUMP PERFORMANCE AND DURABILITY TEST PROCEDURES
standard by SAE International, 03/23/2023
SAE AS1708H
FITTING END, INTERNAL FLARE, DESIGN STANDARD
standard by SAE International, 06/02/2023
SAE J3280_202306
Guidelines for Haptic Interaction in a Driver Vehicle Interface
standard by SAE International, 06/20/2023