Category: SAE

STUD, STEPPED – 1.5 DIA ENGAGEMENT, A286, MJ METRIC 6 X 1 – 5 X 0.8 (Stabilized: Dec 2014)
standard by SAE International, 12/05/2014

Aluminum Alloy, Hand Forgings and Rolled Rings 1.0mg 0.60si 0.28cu 0.20cr Solution Heat Treated, Stress Relieved By Compression, and Precipitation Heat Treated
standard by SAE International, 03/12/2003

CLIP – SPRING, TENSION, INNER 5.5 MM BOLT HOLE, AMS 5525, METRIC
standard by SAE International, 12/10/2012

WASHER, KEY – 90 DEGREES LOCKING, CRES, UNS S32100, METRIC
standard by SAE International, 12/10/2012

NUT, SELF LOCKING – HEX EXTENDED WASHER UNS N07001, SILVER PLATE, MJ THD, METRIC
standard by SAE International, 10/21/2014

BOLT, MACHINE – SPLINE DRIVE HD, CLOSE TOL FULL SHANK, UNS N07001, METRIC
standard by SAE International, 10/28/2013

Stud, Stepped, 2.0 Dia Engagement, A286, Mj Metric, 8 X 1 – 7 X 1
standard by SAE International, 01/01/1988

BOLT, MACHINE-SPLINE EXTENDED WASHER, PD SHANK, LONG THREAD, DRILLED, AMS5662 METRIC
standard by SAE International, 05/03/2015

STUD, STEPPED – 2.0 DIA ENGAGEMENT, A286, MJ METRIC 6 X 1 – 5 X 0.8 (Stabilized: Jan 2015)
standard by SAE International, 01/09/2015

STUD, STRAIGHT – 2.5 DIA ENGAGEMENT, A286, MJ METRIC 6 X 1 – 6 X 1
standard by SAE International, 10/28/2013