Category: SAE

Steel, Corrosion- and Heat-Resistant, Welding Wire 18.5Cr – 11Ni – 0.40Cb (Nb) (SAE 30347)
standard by SAE International, 05/22/2023

Seat Belt Restraint System Hardware – Glossary of Terms (Stabilized: Jul 2022)
standard by SAE International, 07/08/2022

Steel, Corrosion-Resistant, Flat Wire 18Cr – 9.0Ni (302) Spring Temper
standard by SAE International, 07/19/2022

SPRING, HELICAL, COMPRESSION: FOR LOADS BELOW 20 LBF
standard by SAE International, 03/20/2023

Hard Anodic Coating on Aluminum Alloys Polytetrafluoroethylene (PTFE)-Impregnated or Codeposited
standard by SAE International, 07/08/2022

Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, Foil and Plate 52.5Ni – 19Cr – 3.0Mo – 5.1Cb (Nb) – 0.90Ti – 0.50Al – 18Fe Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated
standard by SAE International, 05/22/2023

Road Vehicles – Cybersecurity Engineering
standard by SAE International, 08/31/2021

Recommended Practice for Braking, Stability, and Control Performance Test Procedure for Air Brake-Equipped Truck-Tractors
standard by SAE International, 03/23/2023

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr – 8.0Ni – 2.2Mo – 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardened (H1000)
standard by SAE International, 03/23/2023

PWM HVAC Blower Controller and BLDC Motor Controller Efficiency Assessment
standard by SAE International, 06/13/2023